Completed Projects
- DEA-100 – Drill String Safety Valve
- DEA-101 – Underbalanced Drilling and Completion Technology
- DEA-105 – Coiled Tubing Depth Measurement
- DEA-108 – Non-rotating Drill Pipe Casing Protectors
- DEA-111 – Assesment of the Data Acqusition Capabilities of Major World Tubular Mills and Processors
- DEA-113 – Drilling Gumbo Shale – A Study of Environmentally Acceptable Muds to eliminate shale hydration and related borehold problems
- DEA-119 – A Proposal to Develop an Improved Methodology for Pre-Drill Pore Pressure and Fracture Gradient Prediction for Deep Water Wells
- DEA-120 – Underbalanced Completions Manual (UBC)
- DEA-130 – Modernization of Tubular Collapse Performance Properties
- DEA-132 – Use of Converted Shear Wave Data to Identify Shallow Water Hazards Prior To Drilling
- DEA-133 – Shallow Water Flow Database
- DEA-137 – Deepwater Riser Wear Technology
- DEA-139 “Advanced Wellbore Stability Model (WELLSTAB-PLUS)”
- DEA-146 – JIP to Develop Hollow Sphere Dual-Gradient Drilling System
- DEA-147 – “STABView” – A Borehole Stability, Lost Circulation, and Sand Production Risk Analysis Software
- DEA-151 – “The Modernization of Connection Performance Properties”
- DEA-157 – Step Change in Directional Drilling Control and Efficiency when using Motor Steerable Systems
- DEA-160 – Shoulder/Thread Verifier System
- DEA-42 – Improved Casing and Riser Wear Technology
- DEA-44 – Extended-Reach and Horizontal Well Technology
- DEA-49 – WellSite Advisor Well Control Program Well Control Program
- DEA-50 – Multi-Sensor PackagePhase I & II
- DEA-51 – Subsea Blowout Control Phase III
- DEA-54 – Program for Determination of Drill Pipe Fatigue and Inspection Intervals
- DEA-57 – Spurt Loss Under Simulated Downhole Drilling Conditions
- DEA-59 – Develop a Computer System for the Prediction of Pore Pressures and Fracture Gradients from Well Logs ware, complete end ’93
- DEA-60 – Utilization of Baroid MUDMAN to Develop Drilling Rig Site Diagnosis and Management System
- DEA-61 – Testing of Non-Lead/Zinc Thread Compounds Stress Engineering
- DEA-63 – Floating Vessel Blowout Control Fire Fighters
- DEA-67
- DEA-67 – Slim-Hole Drilling and Coiled Tubing (also presented in Europe as DEA(E)-35]
- DEA-68 – Titanium Drillpipe for Extended Reach Drilling
- DEA-70 Reduction of Bit Balling by Electro-Osmosis
- DEA-71 – Drilling Research & Resource Assessment, also DEA(E)- 48(DRARAP)
- DEA-71 Phase II Proposal Summary
- DEA-74 – Drill Stem Design Inspection Standard ER Section/Failure Diagnosis. PC Software–reduce DS failures/hole cleaning
- DEA-74 – Drilling Research & Resource Assessment, also DEA(E)- 48(DRARAP)
- DEA-75 – Lubricity & Sticking Properties of WBM
- DEA-77 – Radio Frequency Heating to Clean Oily Drill Cuttings
- DEA-78 – Cable-suspended Dwnhole Electro coring Electro-hole opening
- DEA-79 – Well Planning System Software Development
- DEA-80 – The Use of Quantitative Risk Analysis (QRA) in Casing/Tubing Design (presented Europe DEA(E)64
- DEA-81 – Engineering Design of Cuttings Disposal by Reinjection into a Hydraulic Fracture
- DEA-82 – Well Control Equipment Information Base
- DEA-85 – Catalog of Drilling and Completion Software
- DEA-87 – Performance Studies of Mud Converted to Cement (S-Mix)
- DEA-90 – Drilling Plastic Shale at Great Depth-A Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids
- DEA-90 – Phase III “Drilling Plastic Shale at Great Depth – A Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids”
- DEA-91 – Comparison of API and GOST Standards
- DEA-97 – Coiled Tubing Weld Fatigue
- DEA-99 – Analysis of Casing Damage Induced by Reservoir Compaction
- DI-66 – Probabilistic OCTG Design Technology
- Phase II