All Projects
- DEA-160 – Shoulder/Thread Verifier System
- DEA-157 – Step Change in Directional Drilling Control and Efficiency when using Motor Steerable Systems
- DEA-090 Phase IV – Drilling Plastic Shale at Great Depth; A Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids
- DEA-147 – “STABView” – A Borehole Stability, Lost Circulation, and Sand Production Risk Analysis Software
- DEA-150 – Diminished Drillpipe Capacity Due to Slip Crushing
- DEA-154 – DGS Technology Dual Gradient Services
- DEA-146 – JIP to Develop Hollow Sphere Dual-Gradient Drilling System
- DEA-139 “Advanced Wellbore Stability Model (WELLSTAB-PLUS)”
- DEA-137 – Deepwater Riser Wear Technology
- DEA-133 – Shallow Water Flow Database
- DEA-132 – Use of Converted Shear Wave Data to Identify Shallow Water Hazards Prior To Drilling
- DEA-130 – Modernization of Tubular Collapse Performance Properties
- DEA-120 – Underbalanced Completions Manual (UBC)
- DEA-119 – A Proposal to Develop an Improved Methodology for Pre-Drill Pore Pressure and Fracture Gradient Prediction for Deep Water Wells
- DEA-113 – Drilling Gumbo Shale – A Study of Environmentally Acceptable Muds to eliminate shale hydration and related borehold problems
- DEA-111 – Assesment of the Data Acqusition Capabilities of Major World Tubular Mills and Processors
- DEA-108 – Non-rotating Drill Pipe Casing Protectors
- DEA-105 – Coiled Tubing Depth Measurement
- DEA-101 – Underbalanced Drilling and Completion Technology
- Phase II
- DEA-100 – Drill String Safety Valve
- DEA-99 – Analysis of Casing Damage Induced by Reservoir Compaction
- DEA-97 – Coiled Tubing Weld Fatigue
- DEA-91 – Comparison of API and GOST Standards
- DEA-90 – Drilling Plastic Shale at Great Depth-A Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids
- DEA-90 – Phase III “Drilling Plastic Shale at Great Depth – A Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids”
- DEA-87 – Performance Studies of Mud Converted to Cement (S-Mix)
- DEA-85 – Catalog of Drilling and Completion Software
- DEA-82 – Well Control Equipment Information Base
- DEA-81 – Engineering Design of Cuttings Disposal by Reinjection into a Hydraulic Fracture
- DEA-80 – The Use of Quantitative Risk Analysis (QRA) in Casing/Tubing Design (presented Europe DEA(E)64
- DEA-79 – Well Planning System Software Development
- DEA-78 – Cable-suspended Dwnhole Electro coring Electro-hole opening
- DEA-77 – Radio Frequency Heating to Clean Oily Drill Cuttings
- DEA-75 – Lubricity & Sticking Properties of WBM
- DEA-74 – Drill Stem Design Inspection Standard ER Section/Failure Diagnosis. PC Software–reduce DS failures/hole cleaning
- DEA-74 – Drilling Research & Resource Assessment, also DEA(E)- 48(DRARAP)
- DEA-71 – Drilling Research & Resource Assessment, also DEA(E)- 48(DRARAP)
- DEA-71 Phase II Proposal Summary
- DEA-70 Reduction of Bit Balling by Electro-Osmosis
- DEA-68 – Titanium Drillpipe for Extended Reach Drilling
- DEA-67 – Slim-Hole Drilling and Coiled Tubing (also presented in Europe as DEA(E)-35]
- DEA-67
- DEA-63 – Floating Vessel Blowout Control Fire Fighters
- DEA-61 – Testing of Non-Lead/Zinc Thread Compounds Stress Engineering
- DEA-60 – Utilization of Baroid MUDMAN to Develop Drilling Rig Site Diagnosis and Management System
- DEA-59 – Develop a Computer System for the Prediction of Pore Pressures and Fracture Gradients from Well Logs ware, complete end ’93
- DEA-57 – Spurt Loss Under Simulated Downhole Drilling Conditions
- DEA-54 – Program for Determination of Drill Pipe Fatigue and Inspection Intervals
- DEA-51 – Subsea Blowout Control Phase III
- DEA-50 – Multi-Sensor PackagePhase I & II
- DEA-49 – WellSite Advisor Well Control Program Well Control Program
- DEA-44 – Extended-Reach and Horizontal Well Technology
- DEA-42 – Improved Casing and Riser Wear Technology
- DI-114 – Development of an Advanced High Temperature High Pressure Downhole Power Supply
- DI-113 – Environmentally Friendly Drilling Systems
- DI-112 – Proposal to the National Science Foundation for an Engineering Research Center for Extreme Environment Electronics (CE3)
- DI-111 – Drilling and Completion Gaps for HP HT Wells in Deep Water
- DI-110 – Deepwater Improved Coring Efficiency with Real-time Data Collection
- DI-109 – WellBore stability and data acquisition in fractured formations
- DI-108 – HeviPac Weight Transfer Assembly
- DI-107 – Possible Impact of “POSGRIP™ technology” in the Oil Field
- DI-106 – Opportunities of Applying the Smart Metal ” Terfenol-D” in the Oil Field”
- DEA-151 – “The Modernization of Connection Performance Properties”
- DI-103 – Possible JIP for Titanium Drillpipe
- DEA-155 – A Probabilistic Approach to Risk Assessment of Managed Pressure Drilling Offshore
- DI-102 – STUDY TO DETERMINE THE SAFE APPLICATION OF UNDERBALANCED DRILLING IN THE GULF OF MEXICO
- DI-101 – Deep Water Blow Out Intervention
- DI-100 – Pulsing of Casing Annulus
- DI-99 – SWIFT RISER A Deepwater Composite Coiled Tubing well intervention system
- DI-98 – Developing Technology
- DI-97 – Flat Time Reduction – Approach, Methodology and Tools
- DI-96 – Drilling Salt at Depth – A Study to Improve Drillability through Salt in Deep Water Wells
- DI-96 – Drilling Salt at Depth – A Study to Improve Drillability through Salt in Deep Water Wells
- DI-95 – Well Planning from Seismic Data: Establishing the Geomechanical Link
- DI-93 – Flat Time reduction – Real Time Data Analysis
- DI-92 – “Limit States Design of Well Casing in Massive Salt Formations”
- DI-92A – Riser Tensioning System
- DI-91 – “Benefits and Barriers to an Industry Wide Knowledge Sharing Process”
- DI-90 – Improving Gas Well Cementing Through Cement Pulsation
- DI-89- DOE High Power PDM
- DI-88 – Insulated Drill Pipe
- DI-87 – Survey of Alternative Environmental Detection & Cleanup Methods for Wellsite Operations
- DI-86 – Seismic while Drilling for Enhanced Look-Ahead-of-Bit Capabilities
- DI-85 – Drilling Performance Measurements
- DI-84 – IntelliDril – Diagnostics-While-Drilling
- DI-83 – STA-Bit, The Dynamically Stabilized PDC Drill Bit
- DI-82 – STEERABLE DRILLING TOOL FROM THE POINT OF FIRST FIELD TRIALS THROUGH TO PRODUCTION AND COMMERCIALISATION
- DI-81 – Joint Industry Program for Floating Vessel Deepwater Blowout Control
- DI-80 – Look Ahead – Pore Pressure Prediction Ahead of the Bit
- DI-79 – Software for Estimating Downhole in Offshore Drilling
- DI-78 – Deepwater Pore Pressure Prediction
- DI-77 – Field Testing of HydroPulse Tool for Suction Pulse Drilling and Seismic-while-Drilling
- DI-76 – Drillstring Failures Database and Drillstring Dynamics Software Validation
- DI-75 – Drill-In Fluids – A Study of Formation Damage Caused By Drilling at Downhole Temperatures and Pressures
- DI-74 – DISPOSAL OF OILFIELD WASTE IN UNCONSOLODATED MEDIA BY SLURRY FRACTURE INJECTION
- DI-73 – Offshore Drilling with Light-weight Fluids
- DI-72 – Suction Installation of Structural Casing
- DI-71 – Extended Reach Composite Material Drill Pipe
- DI-70 – Drilling Gumbo Shale
- DI-69 – Deepwater Drilling Rig Allen Gault of Conoco
- DI-68 – Downhole Tractor Ken Neuman of CTES
- DI-67 – Low Cost Coiled Tubing Pumping System to De-water Gas Wells
- DI-66 – Probabilistic OCTG Design Technology
- DI-65 – Cesium Formate Drilling Fluids
- DI-64 – Dual Diameter Drillpipe
- DI-63 Composite Drill Pipe
- DI-62 Drilling Engineering Data Used as Exploration Enhancement Tools
- DI-61 – Casing Conveyed Perforating
- DI-60 – Electro-Osmosis Prototype
- DI-59 – Composite Drill Pipe
- DI-58 Proposal to determine the most effective way to seal cores
- DI-57 – Analysis of Well Casing Damage Induced by Reservoir Compaction and Formation Shear
- DI-56 – Introducing Top-Drive Hydraulic Drilling Rigs
- DI-55 – Drilling Data Sharing Project
- DI-54 – Proposal to Develop Useful Safety Valves (DSSV’s) Specifications for Drill String
- DI-52 The MultiCon Drilling System
- DI-53 Drilling Plastic Shale at Great Depths – A Proposed Study to Improve Penetration Rates with Environmentally Acceptable Drilling Fluids
- DI-50 – Proposal for a consortium on “Mapping of Stress State in the Gulf Coast”
- DI-51 – Acoustic Telemetry for MWD
- DI-51 – Acoustic Telemetry for MWD
- DEA-156 – Smart Shuttle
- DEA-158 – Development of Self-Expanding Tubular Technology (CFEX©)
- DEA-159 – Implementing Plug and Play for Computer Controlled Drilling Equipment
- DEA-160 – Shoulder/Thread Verifier System
- DEA-161 – A Proposal to Develop an Improved Methodology for Wellbore Stability Predictiona
- DEA-162 – DeepTrek JIP for Advancing Deep, Hard Rock Drilling Performance through Controlled, Full-scale Laboratory Drilling Experiments with Aggressive Bits and Specialized Fluids
- DEA-163 – CoilFlat CT Liner Technology Demonstration
- DEA-164 – Requirements for Advanced MWD Directional with Ranging, for Safety in Intersection, SAGD, Anti-Collision